Concentrated Cleaner for Endoscopes and Medical Instruments

image 1 5


Actoclean® Flüssig, is an enzyme-free cleaning product in liquid form for medical instruments. Does not cause formation of corrosion. Phosphate-free.

Actoclean® Flüssig is suitable for use manually or with ultrasonic washing machines for the cleaning of surgical instruments made of stainless steel, including minimally invasive surgical (MIS) instruments, dental instruments, endoscopes, anesthesia materials, heat resistant and non-heat-resistant materials.

Chemical composition​

100 g contains: 

Nonionic surfactant, 0.8 g Benzalkonium chloride, corrosion inhibitors and auxiliary substances.

Concentration of Use

Concentration RatioAmount of WaterProduct Quantity
% 0,51000 ml5 ml
% 11000 ml10 ml

Method of Use:​

Use a dosing pump to prepare the solution. Fill the instrument bath with water (at room temperature). The recommended concentration of use and contact time are between 0.5% and 1%, depending on the degree of dirtiness, for a maximum of 5 minutes. Add Actoclean® Flussig to the instrument bath in an appropriate ratio, mix the product. Make sure that all instruments come into contact with the solution during application. Keep the lid of the bath closed. Wait for the contact time. Remove all instruments from the solution and rinse with water of at least drinking quality, and dry them. If necessary, repeat the cleaning process and brush the instruments with a suitable brush. The solution is suitable for routine use and should be replaced immediately in case of visible dirtiness. You can use either Acto® Oil Spray SF or Actoton® M for maintenance of the instruments.


Article-No.UnitPieces in Box
01.0801.11 L14
01.0801.55 L4